Fabricated and installed new removable exhaust blankets for a motor yacht, replicating the removed originals in 1" and 2" Superwool rated to 2195°F, matched to the original thickness with a gray silicone cloth outer finish and a Stevens cloth high-temperature woven fiberglass inner liner.
Fabricated four removable 3" exhaust blankets, 87" x 20" each, for a tugboat operating company in Fort Lauderdale — Superwool rated to 2195°F with a Stevens cloth inner layer and gray silicone outer layer.
Fabricated 23 exhaust blankets in 2" Superwool rated to 2195°F for the passenger ship M/V Grand Luxe, using the removed originals as patterns and installing stainless steel lacing hooks as needed to wire the new blankets in place.
Repaired damaged engine room insulation aboard a motor yacht with 1" Armaflex closed-cell elastomeric insulation, using Armaflex hangers to support the lines and restore condensation control.
Fabricated and installed custom insulation blankets aboard the M/V Gem for Tropical Shipping’s Riviera Beach operation.
Fabricated and installed 2" thick removable blankets for the main engine exhaust manifold piping aboard the M/V Tropic Freedom, built to come off and go back on during routine engine service.
Fabricated custom pillow blankets in 2" Superwool rated to 2195°F with a Stevens cloth exterior and a double-layer top for this turbocharger manufacturer — a 4' diameter x 6" cushion and a 24" diameter x 4" cushion.
Modified and refit acoustic sound panels aboard the M/V Rosa, a roll-on/roll-off landing craft — trimming panels to fit and piecing in mineral wool at the bulkhead to close gaps in the sound barrier.
Fabricated and installed 2" thick Superwool removable exhaust blankets for the main engine flanged flex connection and six additional flanged flex connections down the side of the engine, all built removable for service access.
Fabricated 78 removable valve jackets in 1" Superwool with a gray finish for a cruise line, covering DN25 through DN200 valves across PN16, PN25, and PN40 pressure classes.
Insulated training engine exhaust piping, mufflers, and catalytic converters with Superwool finished in aluminum across multiple bays at this Caterpillar training facility, fabricating removable blankets at every flange and flex connection for future service access.
Custom-fabricated and installed two marine insulation blankets for this yacht services company in Jupiter.
Custom-fabricated removable insulation blankets for turbochargers and riser piping, built for high heat and easy service access.
Rush-fabricated and installed a custom removable insulation pad for an exhaust elbow and flange aboard this motor yacht, keeping the vessel on schedule.
Replaced insulation removed by others aboard this Feadship motor yacht with faced mineral wool, taping all seams and matching the original thickness for a factory-quality finish.
Fabricated and installed new removable exhaust blankets in Superwool for this vessel, matched to the original thickness with a gray silicone cloth exterior and Stevens cloth liner.
Custom-fabricated and installed three marine insulation blankets for this vessel's exhaust system.
Custom-fabricated removable blankets in Superwool with a gray silicone outer, Stevens cloth and stainless mesh inner for this marine power specialist, matched to the originals.
Insulated an additional 1,200 sq. ft. of bulkhead aboard a charter yacht with 2" A-60 fire-rated mineral wool with a foil facing, meeting SOLAS A-60 structural fire protection requirements.
Removed the original exhaust blankets from both main engines and fabricated and installed new 2" Superwool blankets with a Stevens cloth inner liner and a black silicone outer finish.
Fabricated 16 removable ball valve jackets for a cruise line, covering DN65, DN80, DN150 and DN200 valves — built to come off for inspection and go back on without demolition.
Fabricated ten removable blankets in 1" Superwool with a gray silicone finish and a stainless steel mesh and cloth inner liner, fitted with stainless lacing hooks and installed on the vessel’s return.
Fabricated and installed 2" thick removable exhaust blankets for the starboard main engine.
Fabricated two 8" thick, 34" diameter insulated exhaust covers with a two-layer Stevens cloth cover for a tugboat operating company.
Stripped, cleaned and re-insulated the portside generator sound panels with 1-1/2" loaded vinyl Mylar-faced acoustic foam, restoring noise control in the machinery space.
Fabricated and installed removable exhaust blankets on all three main engines aboard the Bayou Teche, running from the flex connections down to the turbochargers.
Stripped and replaced chilled water insulation throughout a motor yacht — fan coil units in the crew area and main salon, overhead mains, engine room, galley, lazarette, master stateroom and both port and starboard air shafts — in Armaflex from 5/8" through 3-1/8", plus 1" fiberglass board on the bulkheads.
Installed perforated pins through the main salon and wheelhouse crawl space overheads to carry new 1" and 2" foil-faced mineral wool insulation, sealing the seams with ASJ tape.
Fabricated new 2" exhaust blankets from the originals dropped off at our shop, matched to the existing pattern and thickness.
Fabricated two custom turbocharger insulation covers for this mechanical insulation contractor.
Insulated the chilled water pump and the surrounding uninsulated piping aboard a motor yacht to stop condensation in the machinery space.
Insulated seven chilled water headers across multiple vessels with 3/4" Armaflex and pipe hangers for this marine systems contractor.
Fabricated and installed 2" thick Superwool removable exhaust blankets for the main engine flanged flex connection and six further flanged flex connections down the side of the engine.
Produced 51 removable turbocharger and exhaust riser blankets for 8V92 and 692 marine diesel engines for this parts distributor, built to a repeatable shop pattern.
Fabricated and installed two removable exhaust blankets for the flex connections aboard a Hargrave motor yacht — 2" Superwool with an aluminized Stevens cloth exterior and a Stevens cloth and stainless wire mesh interior.
Stripped and replaced insulation on the chiller piping and valves, and made good missing insulation along the chilled water run through the crawl space from the engine room.
Fabricated and installed 2" thick Superwool removable exhaust blankets on the forward generator piping aboard the Duke of Topsail.
Fabricated 2" thick Superwool removable exhaust blankets for both main engines aboard the Grand Express.
Repaired and reinsulated chilled water lines aboard a motor yacht in Armaflex from 5/8" through 3-1/8" — ninety-six journeyman hours on site.
Fabricated eight removable turbocharger blankets to pattern for this power systems dealer.
Fabricated a production run of 100 removable insulation blankets in four sizes for this marine services supplier.
Repaired chilled water insulation on the pumps and header assembly aboard a motor yacht.
Fabricated and installed 2" thick Superwool removable blankets on the main engine exhaust piping of a motor yacht for this refit yard.
Repaired chilled water lines above the overhead in a stateroom head.
Cut back and repaired overhead insulation where cable runs had damaged it, and replaced bulkhead insulation with 4" foil-faced A-60 rated mineral wool.
Fabricated and installed a 2" thick removable blanket on the elbow at the turbocharger connection.
Fabricated and installed removable exhaust blankets across three Fisher Island ferries — generator exhaust to the first elbow above the flex on Pelican II, main engine elbow and flex connections on Seahawk, and mezzanine exhaust to the fire elbow above the flex on Eagle II.
Fabricated and installed 2" thick Superwool removable blankets on both generators aboard the M/V Sea Express, from the turbochargers up to the hard covering.
Replicated four blankets to sample for this marine insulation firm — two outer blankets in 2" Superwool with a gray exterior finish over stainless steel mesh and Stevens cloth, plus two under-layers in 1" Superwool with Stevens cloth and stainless mesh.
Fabricated and installed removable blankets for both generator charging pipes.
Fabricated 18 removable blankets in 1" Temp-Mat with a stainless steel mesh inner face and stainless lacing hooks at both ends, in two sizes.
Installed 2" insulation above the windlass for this superyacht supply company.
Installed 2" Superwool insulation on new exhaust piping using owner-supplied materials, and fabricated .040 aluminum jacketing pieces to match the existing work.
Fabricated and installed four removable blankets for the portside generator, plus an underlined and oversized flex blanket for the portside main engine.
Fabricated four sets of 2" Superwool removable exhaust blankets matched to the samples brought into our shop.
Removed old insulation from the shipside bulkhead inside the refrigeration closet and replaced it with 2" foil-faced mineral wool with taped seams; recovered the top half of the bow thruster tube with new cloth, retaped the seams and edges, and sealed the area with lagging coating.
Fabricated 1" thick Superwool removable blankets for both main engines.
Fabricated and installed new exhaust blankets inside the starboard generator enclosure aboard the M/V Rosa — a turbo manifold blanket and a 90-degree elbow blanket coming up through the top of the enclosure.
Fabricated and installed a main engine flex blanket aboard a Hargrave-built motor yacht.
Fabricated a three-blanket set in 2" Superwool with a Stevens cloth finish, wire mesh inner and gray silicone cloth outer layer, fitted with stainless steel lacing hooks.
Repaired generator insulation with Superwool and adhered lag cloth at this Doral pump station, and fabricated removable blankets at the flange-to-pipe connections for future service access.
Fabricated custom removable insulation blankets for engine exhaust components at South Florida Water Management District pump stations, preserving service access at critical flood-control infrastructure.
Reinsulated piping and fabricated custom insulation pads in Temp-Mat with a gray silicone finish at this aerospace manufacturing facility, built removable for ongoing maintenance access.
Removed aging exhaust blankets and calcium silicate from the generator and fabricated a full set of new removable blankets — Y-section, turbos, risers, flanges, and overhead piping — in Superwool Plus with glass cloth facings, stainless mesh lining, and sealed with Foster lagging coating at the Sunrise Civic Center.
Union craftsmen, done right the first time, on time. Send us your plans for a free estimate.
Request a Free Estimate